Orbiloc Service Kit

This Orbiloc Service Kit is the perfect solution if you want an affordable and efficient way to keep your Orbiloc Safety Light™ shining brightly.

Only $20 NZD

The kit includes (1) a battery pack of two CR2032 batteries, (2) an o-ring lubricated with silicone, and (3) a service tool to tighten/untighten the light.

Reliable – batteries provide an additional 100 hours steady / 250 hours flashing
Waterproof – o-ring ensures safety light is waterproof to 100m
Accessible – service tool provides easy access to the battery and o-ring
Speedy – fast dispatch time (usually same day) and express shipping
Guaranteed – all products are covered by the Led & Collared® Gear Guarantee.

Add to cart

Please check your selection

Refer to our returns, shipping & product care information.

Product safety and care tips:

Never use our products for anything other than their intended purpose – misuse of gear can lead to injury or damage.
When changing the battery pack please make sure that the + symbol is facing down in the base of the Orbiloc Safety Light™.
If the Orbiloc Safety Light™ gets muddy or exposed to seawater, please rinse the outside of the light with running fresh water while turning the Mode Selector Ring. Do not open or disassemble while rinsing.
We recommend replacing the o-ring every time you replace the battery pack to ensure the light stays waterproof.
If your light is used in wet environments the o-ring must to be lubricated regularly.
If you use your light when diving - we recommend you clean the o-ring before and after every dive, and lubricate the o-ring before every dive.
Remove the Battery Pack for long-term storage, and store the batteries in a dry, well-ventilated area, out of direct sunlight.

Further information and ‘how to’ videos can be found on the Orbiloc website: https://orbiloc.com/